2-Way Sawdust Removal - Craftsman 320.28223 Operator's Manual

IMPORTANT: When you are manually scroll cutting always hold the saw handle
in one hand and rotate the scrolling knob with your other hand, while applying
pressure to the front of the saw so it does not jump out of the workpiece.
NOTE: When scroll cutting intricate designs, we recommend that you use a scroll
cutting blade.
,_ CAUTION: Excessive side pressure to the blade could break the blade which
could damage the material being cut.
2=WAY SAWDUST REMOVAL
Your jig saw is equipped with a
2-way sawdust removal system.
1. Unplug the saw.
2.
Switch the
vacuum/blower knob
(Fig. 12) to the BLOWER
position to blow sawdust,
metal and plastic chips
away from the cutting area.
OR
1.
2.
Unplug the saw.
Switch the
vacuum/blower knob
(Fig. 12) to
the VACUUM position.
3. Attach the dust tube to the
saw (Fig. 13).
4.
Connect the dust tube
to a 1/4"vacuum adapter
(sold separately) and then
to a standard shop vac to
remove sawdust, metal and
plastic chips.
Fig. 13
28223 Manual_Revised_S0 0310 Page 22