Telnet Commands - HP Surestore 6164 - Switch User Manual

A

TELNET COMMANDS

The Telnet commands are available through the shell admin account. To use
a Telnet command, log into the relevant switch with administrative
privileges, enter the command along with any required operands, and press
Enter.
Fabric Watch can be accessed simultaneously from different
Note
connections, by Telnet, SNMP, Web Tools, or by modifying and uploading
the Fabric Watch configuration file to the switch. If this happens, changes
from one connection might not be updated to the other, and some can be
lost. If " " displays during a Telnet
Committing configuration...
session, the configuration might have been recently modified from another
connection.
Table 2 summarizes the Fabric Watch Telnet commands.
27