Deleting All Scc, Dcc, Or Fcs Policies; Activating All Scc, Dcc, Or Fcs Policies; Distributing An Scc, Dcc, Or Fcs Policy - Brocade Communications Systems StoreFabric SN6500B Administrator's Manual

8. Select a switch or highlight multiple switches to add to the policy by clicking Add or Add All.
9. Select a switch or highlight multiple switches to remove a policy by clicking Remove.
10. Click Next and click Finish to confirm the changes to the switch.

Deleting all SCC, DCC, or FCS policies

You cannot delete the FCS policy from non-primary or non-FCS switches.
The Delete All button is enabled only when there is at least one policy activated.
To delete all SCC, DCC, or FCS policies, perform the following steps.
1. Open the Switch Administration window as described in
2. Select the Security Policies tab.
3. Click Delete All.
4. Click OK to delete all the policies.

Activating all SCC, DCC, or FCS policies

After a policy is created or modified, you can distribute it to the remaining fabric.
To delete a policy, you must activate a new or empty policy.
To activate all SCC, DCC, or FCS policies, perform the following steps.
1. Open the Switch Administration window as described in
2. Select the Security Policies tab.
3. Click Activate All to activate all the policies.

Distributing an SCC, DCC, or FCS policy

Perform this procedure to distribute an SCC, DCC, or FCS policy.
NOTE
SCC and DCC policy can be distributed only for a primary switch.
To distribute an SCC, DCC, or FCS policy, perform the following steps.
1. Open the Switch Administration window as described in
2. Select the Security Policies tab.
3. Select the appropriate tab (SCC, DCC, or FCS).
Web Tools Administrator's Guide
53-1002756-01
window" on page 31.
A warning message displays.
window" on page 31.
NOTE
Activating the policy moves it into the Activate Policy Set window.
window" on page 31.
Access control list policy configuration
"Opening the Switch Administration
"Opening the Switch Administration
"Opening the Switch Administration
15
175