Modifying A Shared Secret Key Pair; Setting The Switch Policy Authentication Mode; Snmp Configuration; Setting Snmp Trap Levels - Brocade Communications Systems StoreFabric SN6500B Administrator's Manual

Brocade web tools administrator's guide v7.1.0 (53-1002756-01, march 2013)
Hide thumbs Also See for StoreFabric SN6500B:
Table of Contents

Advertisement

15

SNMP configuration

6. Enter the Switch or HBA WWN, name, or domain ID, or use the Browse button to select a
7.
8. In the Local Secret and Confirm Local Secret fields, enter the local secret value.
9. Click Add.
10. When you are finished adding secret key pairs for switches, click Apply.

Modifying a shared secret key pair

You can edit and modify the secret key pairs by switch.
To modify a shared secret pair, perform the following steps.
1. Open the Switch Administration window as described in
2. Select the Security Policies tab.
3. Select Authentication on the Security Policies menu.
4. Select the Shared Secret Keys subtab.
5. Select a secret key pair and click Edit.
6. Make the appropriate changes and click OK.

Setting the Switch Policy Authentication mode

This setting determines whether or not authentication is required when a switch logs in to a fabric.
To set the Switch Policy Authentication mode, perform the following steps.
1. Open the Switch Administration window as described in
2. Select the Security Policies tab.
3. Select Authentication on the Security Policies menu.
4. Use the Switch Policy Authentication Mode option to select the authentication policy.

SNMP configuration

This section describes how to manage the configuration of the SNMP agent in the switch. The
configuration includes SNMPv1 and SNMPv3 configuration, accessControl, and systemGroup
configuration parameters.
Access is read-only if you do not have admin or security admin authority.
For more information, refer to the snmpConfig command in the Fabric OS Command Reference.

Setting SNMP trap levels

To set SNMP trap levels, perform the following steps.
180
switch.
In the Peer Secret and Confirm Peer Secret fields, enter the peer secret value.
window"
on page 31.
window"
on page 31.
"Opening the Switch Administration
"Opening the Switch Administration
Web Tools Administrator's Guide
53-1002756-01

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents