Deleting All Scc, Dcc, Or Fcs Policies; Activating All Scc, Dcc, Or Fcs Policies - Brocade Communications Systems 8 Administrator's Manual

3. Select the Security Policies tab.
4. Select a policy by clicking on the appropriate tab.
5. Click Edit.
6. Select the policy type you want to edit.
7.
8. Select a switch or highlight multiple switches to add to the policy by clicking Add or Add All.
9. Select a switch or highlight multiple switches to remove a policy by clicking Remove.
10. Click Next and click Finish to confirm the changes to the switch.

Deleting all SCC, DCC, or FCS policies

You cannot delete the FCS policy from non-primary or non-FCS switches.
The Delete All button is enabled only when there is at least one policy activated.
Use the following procedure to delete all SCC, DCC, or FCS policies.
1. Open the Switch Administration window as described in
2. Select the Security Policies tab.
3. Click Delete All.
4. Click OK to delete all the policies.

Activating all SCC, DCC, or FCS policies

After a policy is created or modified, you can distribute it to the remaining fabric.
To delete a policy, you must activate a new or empty policy.
Use the following procedure to activate all SCC, DCC, or FCS policies.
1. Open the Switch Administration window as described in
2. Select the Security Policies tab.
3. Click Activate All to activate all the policies.
Web Tools Administrator's Guide
53-1001772-01
DRAFT: BROCADE CONFIDENTIAL
This launches the ACL Policy Configuration wizard.
Click Next and click Modify.
window" on page 35.
A warning message displays.
window" on page 35.
NOTE
Activating the policy moves it into the Activate Policy Set window.
Access control list policy configuration
"Opening the Switch Administration
"Opening the Switch Administration
17
217