Brocade Communications Systems StoreFabric SN6500B Administrator's Manual page 189

Every ISL has a default cost that is inversely proportional to its bandwidth.
Use this procedure to set a non-default, "static" cost for any port.
1. Open the Switch Administration window as described in
2. Select the Routing tab.
3. This step is switch-specific:
4. Double-click in the row in the Cost column that corresponds to the appropriate port.
5. Enter the link cost. Valid values for link cost are from 1 through 65534. Setting the value to 0
6. Click Apply.
Web Tools Administrator's Guide
53-1002756-01
window" on page 31.
-
For the Brocade DCX and DCX-4S enterprise-class platforms, click the slot number of the
logical switch under Link Cost in the navigation tree.
-
For Brocade 300, 5100, 5300, 6505, 6510, 6520, 7800, VA-40FC, and the Encryption
Switch, click Link Cost in the navigation tree.
sets the link cost to the default value for that port.
Configuring the link cost for a port
"Opening the Switch Administration
14
161