Brocade Communications Systems StoreFabric SN6500B Administrator's Manual page 119

TABLE 11
Graph type
Port Throughput
Switch Aggregate Throughput
Blade Aggregate Throughput
Switch Throughput Utilization
Port Error
Switch Percent Utilization
Port Snapshot Error
TABLE 12
Graph type
SID/DID Performance
SCSI vs. IP Traffic
SCSI Commands by port and LUN
(R, W, R/W)
Table 13
columns for each graph displays the supported ports.
TABLE 13
Graph type
Port Throughput
Switch Aggregate
Throughput
Blade Aggregate
Throughput
Switch Throughput
Utilization
Port Error
Web Tools Administrator's Guide
53-1002756-01
Basic performance graphs
Display description
The performance of a port, in bytes per second, for frames received and
transmitted.
The aggregate performance of all ports on a switch.
The aggregate performance of all ports on a port card. This graph is
available only for the Brocade DCX and DCX-4S enterprise-class platforms.
The port throughput, in Gbps at the time the sample is taken. For the
Brocade DCX and DCX-4S enterprise-class platforms, this graph displays the
throughput for each slot. You can customize this graph to display
information for particular ports.
CRC errors for a given port.
The percentage utilization for each port in a switch. For the Brocade DCX,
this graph displays the percent utilization for each slot. You can customize
this graph to display information for particular ports.
The CRC error count between sampling periods for all the ports on a switch.
For the Brocade DCX and DCX-4S enterprise-class platforms, this graph
displays the CRC error rate for each slot. You can customize this graph to
display information for particular ports.
Advanced performance monitoring graphs
Display description
The traffic between the SID-DID pair on the switch being managed. The
member selection list in the LHS displays the port in the current switch only.
The All Devices tab lists all the devices in the fabric. SID/DID Performance
can be used to select the source and destination. For more information,
refer to
The percentage of SCSI versus IP frame traffic on each individual port. For
more information, refer to
page 98.
The total number of read/write commands on a given port to a specific LUN.
For more information, refer to
page 98.
lists each graph and indicates the supported port types for each graph. The port selection
Supported port types for Brocade switches
Physical FC ports
P
N/A
N/A
1
P
P
Performance Monitor overview
"Creating SID-DID Performance graphs"
"Creating the SCSI vs. IP Traffic graph"
"Creating SCSI command graphs"
Logical FC ports
P
N/A
N/A
N/A
P
7
on page 97.
on
on
GbE ports
P
N/A
N/A
P
P
91