Operation And Adjustment - Image 10.6 Owner's Manual

OPERATION AND ADJUSTMENT
THE PERFORMANT LUBE
TM
WALKING BELT
Your treadmill features a walking belt coated with
PERFORMANT LUSE
TM,
a high-performance lubricant.
IMPORTANT: Never apply silicone spray or other
substances to the walking belt or the walldng plat-
form. They will deteriorate the walking belt end
cause excessive wear.
HOW TO PLUG IN THE POWER CORD
risk of electric shock, This product is equipped with a.
cord having an equlpment-grounding conductor and a
grounding plug. Plug the power cord into a surge
protector, and plug the surge protector into an
appropriate outlet that Is properly Installed and
grounded in accordance with all local codes and
ordinances.
This product is for use on a nominal 120-volt circuit,
and has a grounding plug that looks like the plug Illus-
trated in drawing 1 below. A temporary adapter that
locks like the adapter illustrated in drawing 2 may be
used to connect the surge protector to a 2-pole recep-
tacle as shown in draw',ng2 if a properly grounded out-
let is not available.
The temporary adapter should be used only until a
properly grounded outlet (drawing 1) can be installed
by a qualified electrician.
Your treadmill, like any other type of sophisticated
electronic equipment, can be seriously damaged by
sudden voltage changes in your home's power.
Voltage surges, spikes, and noise interference can
result from weather con-
ditions or from other
appliances being turned 1
on or off. To decrease
the possibility of your
treadmill belg._ dam-
aged, always use a
surge protector (not
Included) with your
treadmlll.
Surge protectors are
sold at most hardware
stores and department
stores. Use only a UL-
listed surge protector,
rated at 15 amps, with a
14-gauge cord of rNe
feet or less in length.
Thls product must be
grounded. If it should
malfunction or break
down, grounding pro-
vides a path of least
resistance for electdc
current to reduce the
The green-colored dgid ear, lug, or the like extending
from the adapter must be connected to a permanent
ground such as a properly grounded outlet box cover.
Whenever the adapter is used it must be held in place
by a metal screw. Some 2-pole receptacle outlet box
covers are not grounded. Contact a qualified elec-
trician to determine If the outlet box cover is
grounded before using an adapter.
Grounded Outlet Box
/Adapter
_.. ;_/_ __Grounding Pin
_L'u g_'_ _°_/_u ndii g
Metal Screw _ J
Treadmill Power Cord--.
Grounding
Plug 'Surge Protector