Nikon COOLPIX S560 User Manual page 151

Storage
Turn tile camera off when not in use. Check that tile power-on lamp is off before
putting tile camera away. Remove tile battery if tile camera will not be used for an
extended period. Do not store tile camera with naptha or camphor moth balls, or
in any of the following locations:
• Next to equipment that produces strong electromagnetic: fields, such as
televisions or radios
• Exposed to temperatures below -10 °C (14 °F) or above 50 °C (122 °F)
• Poorly ventilated or sub}ect to humidities of over 60 %
To prevent mold or mildew, take tile camera out of storage at least once a month.
Turn tile camera on and release tile shutter a few times before putting tile camera
away
again.
Notes on the Monitor
• The monitor may contain a few pixeB that are always lit or that do not light. This is a characteristic
common to all TFT LCD displays, and does not indicate a malfunction. Images recorded using the
product will not be affected.
• When framing bright subjects, vertical comet like streaks that whiten toward either end may
appear in the display. This phenomenon, known as "smear", does not appear in the final
photograph and does not indicate a malfunction. Some smear may appear in movies.
• Images in the monitor may be difficult to see under bright lighting.
• The monitor is lit by an LED backlight. Should the monitor begin to dim or flicker, contact your
Nikon authorized service representative.
£-
o_
137