Precautions With Regard To Safety - Panasonic PT-AE200E Operating Instructions Manual

Hide thumbs Also See for PT-AE200E:
Table of Contents

Advertisement

Precautions with regard to safety
WARNING
If a problem occurs (such as no image or no sound) or if you notice
smoke or a strange smell coming from the projector, turn off the power
and disconnect the mains lead from the wall outlet.
• Do not continue to use the projector in such cases, otherwise fire or
electric shocks could result.
• Check that no more smoke is coming out, and then contact an Authorised
Service Centre for repairs.
• Do not attempt to repair the projector yourself, as this can be dangerous.
Do not look into the lens while the projector is being used.
• Strong light is emitted from the projector's lens. If you look directly into this
light, it can hurt and damage your eyes.
• Be especially careful not to let young children look into the lens. In
addition, turn off the power when you are away from the projector.
Do not install this projector in a place which is not strong enough to
take the full weight of the projector.
• If the installation location is not strong enough, it may fall down or tip over,
and severe injury or damage could result.
Installation work (such as ceiling suspension) should only be carried
out by a qualified technician.
• If installation is not carried out correctly, there is the danger that injury or
electric shocks may occur.
If foreign
objects or water get inside the projector,
or if the projector
is
dropped
or the cabinet is broken, turn off the power and disconnect
the
mains lead from the wall outlet.
• Continued use of the projector in this condition may result in fire or electric
shocks.
• Contact an Authorised Service Centre for repairs.
Do not overload
the wall outlet.
• If the power supply is overloaded (for example, by using too many
adapters), overheating may occur and fire may result.
Do not remove the cover or modify
it in any way.
• High voltages which can cause fire or electric shocks are present inside
the projector.
• For any inspection, adjustment and repair work, please contact an
Authorised Service Centre.
Clean the mains plug regularly
to prevent it from becoming
covered in
dust.
• If dust builds up on the mains plug, the resulting humidity can damage the
insulation, which could result in fire. Pull the mains lead out from the mains
socket and wipe it with a dry cloth.
ENGL/SH-5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pt-ae300e

Table of Contents