Table of Contents
Advertisement
<Projector
control panel and remote control unit>
"i
• The remote control unit and the projector itself have the same control
buttons available.
_TEMP
indicator
(page 51)
This indicator illuminates if an
abnormally high temperature is
detected inside the projector. If
the temperature rises above a
certain level, the power supply
will be turned off automatically
and the indicator will illuminate or
flash.
® LAMP indicator
(page 52)
This indicator illuminates when it
is time to replace the lamp unit. It
flashes if a circuit abnormality is
detected.
® Power indicator
(pages 22 and 23)
This indicator illuminates red
when the main power is switched
on (Standby Mode), and it
illuminates green when projection
of an image begins.
POWER button
(pages 22 and 23)
_MENU
button
(page 24)
This button is used to display
menu screens. When a menu
screen is being displayed, it can
be used to return to a previous
screen or to clear the screen.
®Arrow
(A, V, • and I_)
buttons
(page 26)
These buttons are used to select
and adjust items in the on-screen
menu screens.
ENTER button
(page 26)
This button is used to accept and
to activate items selected in the
on-screen menus.
®Input
select button
(INPUT/VIDEO/COMPONENT/
PC button) (page 22)
14-ENGLISH
Advertisement
Table of Contents
