Panasonic PT-AE200E Operating Instructions Manual page 25

,,--_PICTURE menu (page 34)
When an S-VIDEO/VIDEO/AV1
signal is being input
PICTURE
7ONTRAST 0 =:===_
BRIGHT 0
COLOUR 0 ===_
TINT 0
3HARPNESS 0 ====_
ZOLOUR TEMP. _ 0
3AMMA ADJUST
_EMOHY SAVE
_EMOHY LOAD
rV-SYSTEM _UTOI
# SELECT _DJ _C
When a YPsPR signal is being
input or SD CARD is selected
.. PICTURE
i
CONTRAST 0 ====_
BRIGHT 0 ===_
COLOUR S _====_===
?INT 0 ==_
_HARPNESS 0 =:==_
_OLOUR TEMP. 4 0 • •
GAMMA ADJUST
MEMORY SAVE
MEMORY LOAD
SIGNAL MODE 525I
# SELECT _DJ _C
When a PC/DVI signal is being input
PICTURE
CONTRAST 0 ====_
BRIGHT 0 ====_
o _=====
SHARPNESS
COLOUR TEMP. _ 0
W-EAL R 0
W-BAL G 0 ===_
W-BAL B 0 ===_
GAMMA ADJUST
MEMORY SAVE
MEMORY LOAD
SIGNAL MODE XGA
# SELECT _DJ BC
"GAMMA ADJUST" is not displayed by PT-AE200E.
* "W-BAL R", "W-BAL G" and '%t_ABAL B" are not displayed when DVI signal
is being input.
POSITION menu (page 38)
When an S-VIDEO/VIDEO/AV1/
YPsPR/DVI signal is being input or
SD CARD is selected
ASPECT POSITIO i 6N : 9
V-POSITION 0
# SELECT _NTRK Bc l
* "ASPECT" can be adjusted only
when a DVI signal is being input
or when "SD CARD" is selected.
When a PC signal is being input
V-POSITION 0
DOT CLOCK 0
CLOCK PHASE 0
SPECT _ 4:3
_UTO SETUP
SELECT _NTER _C |
ENGLISH-25