Adjusting The Picture; Picture Mode; Contrast; Bright - Panasonic PT-AE200E Operating Instructions Manual

Adjusting the picture
Use the • and • buttons to select an
item, and then use the • and I_ buttons
to change the setting for that item.
For items with bar scales, press the
ENTER button or the • or •
buttons to display the adjustment
screen, and then use the • or •
buttons to make the adjustment.
For items without any selective
arrow or bar-scale, press the ENTER
button. The menu screen for the item
will then be displayed.
When an S-VIDEO/VIDEO/AV1
signal is being input
PICTURE
CONTRAST O ==_
BRIGHT 0 ==_
COLOUR 0 =_
TINT 0
SHARPNESS
0
COLOUR TEMP. 4 0
GAMMA ADJUST
MEMORY SAVE
MEMORY LOAD
TV-SYSTEM _UTOI
# SELECT 4mDg
_C
When a YPBPR signal is being input
or SD CARD is selected
• " PICTURE
i .......
CONTRAST 0
BRIGHT O
COLOUR O
TINT 0 ==_
SHARPNESS O ===_
COLOUR TEMP. _ 0 • •
GAMMA ADJUST
MEMORY SAVE
MEMORY LOAD
SIGNAL MODE 525I
# SELECT _DJ _C
When a PC/DVI signal is being input
PICTURE
CONTRAST 0 ==_
BRIGHT 0 =_
SHARPNESS 0
COLOUR TEMP. _ 0
W-BAL R 0
W-BAL G 0 =_
W-BAL B 0 ===_
GAMMA ADJUST
MEMORY SAVE
MEMORY LOAD
SIGNAL MODE XGA
# SELECT _DJ _C
W-BAL R, "W-BAL G" and "W-
BAL B" are not displayed when
DVI signal is being input.
PICTURE MODE
Refer to page 32 for details.
CONTRAST
This adjusts the contrast of the
picture. Press the • button to make
the picture brighter, and press the
• button to make the picture
darker. (Adjust the BRIGHT setting
first if required before adjusting the
CONTRAST setting.)
BRIGHT
This adjusts the darker areas (black
areas) in the picture. Press the •
button if dark areas are too solid (for
example, if hair is difficult to see),
and press the • button if black
areas are too light (grey rather than
black).
COLOUR
(S-VIDEO/VIDEO/YPBPR/AV 1/SD
CARD only)
Press the • button to make the
colour more vivid in tone, and press
the • button to make the colour
more pastel in tone.
34-ENGLISH