Table of Contents
Advertisement
Troubleshooting
Cause & Remedy
• The handset and/or base unit ringer volumes
are turned off. Set to high, medium, or low
(p. 18, 19).
• The Talking Caller ID feature is turned off.
Turn it on (p. 28, 29).
• Name pronunciation
may vary. Name
pronunciation quality is based on names
most commonly used in the United States.
• The handset and/or base unit wilt announce
each letter of abbreviations, such as "Co."
and "Inc.".
• Caller ID supports names of up to 15 letters.
If the caller's name has more than 15 letters,
the name will not be announced correctly.
• The Caller ID Number Auto Edit feature is
turned off. Turn it on (p. 32) and try again.
• You need to press ["%] or [_-] after editing
the number.
• Do not pause for over 60 seconds while
searching.
• Fully charge the battery (p. 12).
• The battery has been discharged. Fully
charge the battery (p. 13).
• Clean the charge contacts and charge again
(p. 13).
• The battery may need to be replaced. If you
install a new battery, fully charge it (p. 12, 13).
• This is normal.
• The Message Alert is turned on and new
messages in your voice mailbox have been
recorded. Turn the Message Alert off (p. 21 )
or listen to the new messages (p. 53).
?/
Advertisement
Table of Contents
