Table of Contents
Advertisement
Installation
Recharge
Recharge the battery when:
Recharge
1
--"Recharge
battery"
is displayed on the handset,
maeeer,,
--"_--i]"
flashes, or
-- the handset beeps intermittently while it is in use.
• The display wilt continually indicate
"Recharge
battery"
and/or "_--iq" will
flash when the handset battery is charged for less than 15 minutes and the
handset is lifted off the base unit.
• If the battery has been discharged, the handset wilt display "Charge
for
6 HRS"
and "_"
when you place the handset on the base unit. The handset will not
work unless the battery is charged. Continue charging.
A nickel metal hydride battery that is recyclable powers the product
you have purchased. Please call 1-800-8-BATTERY
for information
on how to recycle this battery.
Battery
information
After your Panasonic battery is fully charged, you can expect the following performance:
While in use (TALK)
Up to 5 hours
While not in use (Standby)
Up to 11 days
While using the Clarity Booster feature (p. 24)
Up to 3 hours
• A fully charged battery wilt give you up to 5 hours of continuous talk time, or keep
your handset in Standby mode to receive incoming calls for up to 11 days (if no
phone calls are made). Battery power is consumed whenever the handset is off of
the base unit, even when the handset is not in use. The longer you leave the
handset off of the base unit, the time you can actually talk on the handset wilt be
shortened. Actual battery performance depends on a combination of how often
the handset is in TALK mode and how often it is in Standby mode.
• Clean the charge contacts of the handset and the base unit with a soft, dry
cloth once a month. Clean more often if the unit is subject to grease, dust or
high humidity. Otherwise the battery may not charge properly.
• If the battery is fully charged, you do not have to place the handset on the base
unit until "Recharge
battery"
is displayed and/or "4---_1" flashes. This will
maximize the battery life.
• If you want to keep the battery fully charged at all times, place the handset on the
base unit when the handset is not used. The battery cannot be overcharged.
• When the Clarity Booster feature is turned on automatically or manually, battery
operating time may be shortened (p. 24).
/3
Advertisement
Table of Contents
