Table of Contents
Advertisement
If the Following Appear on Your Display...
Display message
cause & Remedy
• When you tried to store an item in the phone book,
Phone
book
full
the phone book memory was full. Press [OFF] to exit
programming
mode. To erase other items from the
phone book, see page 38.
---Incomplete
Tom
Jones
098-765-4321
Phone
book
full
(The name/number
is
an example.)
---Incomplete
Tom
Jones
555-765-4321
(The name/number
is
an example.)
Phonebook
No items stored
Denied
• When the displayed item was sent to the destination
handset, the phone book memory was full and
copying stopped. If you tried to send all of the items,
the item displayed with
"Incomplete"
and items after
it have not been copied to the destination handset.
Press [OFF] to exit (p. 39, 40). To erase items from
the destination handset phone book, see page 38.
You can copy all of the items again or copy the items
which have not been copied one by one (p. 39, 40).
• The destination handset is out of area.
• The destination handset user may have pressed
["_] or [<-].
• Your phone book is empty. No items were copied to
the destination unit.
• The Room Monitor feature is turned off on the
destination handset or base unit and cannot be
monitored (p. 49).
• The called handset was on the base unit. The
handset must be off the base unit to be monitored.
Invalid.
•
The handset you tried to call has not been registered
Please
register
to the base unit. Register the handset (p. 66, steps 5
to
the
base
unit
and 6)
Store VMacces s#
• A voice mail access number is not stored. Store the
number (p. 51).
Error!!
4
handsets
have
already
been
registered.
• 4 handsets have already been registered to the base
unit. To cancel a handset's registration, see page 65.
• You may have registered one of your handsets to
another base unit without deleting its registration to
this base unit. Erase the handset's registration from
the base unit. For the KX-TG5230 base unit:
(1) Press and hold [LOCATOR/INTERCOIMI/
TRANSFER]
for 3 seconds, and (2) Press and hold
the handset number [1] (_') to [4] (_/) that you do
not want for 5 seconds. A long beep sounds, then the
handset number is erased.
68
Advertisement
Table of Contents
