Table of Contents
Advertisement
Using the Caller List
Viewing the Caller List
1
Press the soft key (IrdlTill),
[V],
or [A] to
enter the Caller List.
2
To search from the most recent call, press [V].
To search from the oldest call, press [A].
• The caller's name, number and the time and date
of the call are displayed.
3 Press [OFF] to exit the list.
• If there is no name information for a caller, the display will only show the phone
number.
• Each handset has its own Caller List. If you viewed the Caller List or answered a
call on one handset, the same information in the other handsets will be displayed
as "missed".
• If you do not press any buttons for 60 seconds, the unit will exit the Caller List.
What
"_"
means
"_J"indicates you have already viewed this calling
information or answered the call. If the same caller calls
again, the call entry with the "_J"will be replaced with the
new call entry.
If a caller calls more than once
The number of times the same caller called is displayed
("x2" to "x 9"). The date and time of the most recent call
wilt be recorded. After viewing a caller's information, "x2"
to "x 9" will be replaced with "_J".
SMITH, JACK
1-555-333-4444
3:10P
JUN.10
_
Ex. Called 3 times.
1-555-456-7890
ll:20A
JAN.12
x3
Calling Back from the Caller List
1
Press the soft key (IrdlTill),
[V],
or [A] to enter the Caller List.
2 Scroll to the desired
caller by pressing
IV]
or [A].
3
Press
["%] or [_-].
• The phone number is dialed.
• In some cases, you may have to edit the number before dialing (p. 31 ).
(Ex. You may have to delete "1" and the area code.)
• If a phone number is not displayed in the caller information, you cannot call that
caller back from the Caller List.
30
Advertisement
Table of Contents
