Panasonic Omnivision VHS PV-4564 Operating Instructions Manual page 22

Blue _lulnb_tsi letters (ex. fn~[]) correspond with fold-out Control Reference Guide (froll[ p,_yu).
Turn the SHUTTLE Ring
on the VCR while in Play or Still mode to
place the VCR in Shuttle mode and start a
or reverse
forward search.
IR!
• The Shuttleindicator lights. I_J
• The more you turn the Ring, the faster the
search speed willbe.
2
Press a function button
such as: PLAY, STOP, etc. on the VCR or
remote to release the Shuttle mode.
• The VCR performsthefunctionof the button
pressed.
i
° The Shuttleindicator goes out.
Notes
• When the SHUTTLE Ring is turned more than half way
in Stop mode. normal Fast Forward or Rewind will
begin.
• Some noise bars are normal during Shuttle operation.
• After 3 minutes in Still or Slow, the VCR will go into
Stop mode.
• When the SHUTTLE Ring is released, the VCR goes
into Still mode.
You can set your VCR up to
over and over.
1
Press _ _1
to display the menu.
ROTA31_ TO SELECT
Use
PUSH TO
SET
to first, select SET UP
VCR from the menu
and then, to select
REPEAT PLAY" ON.
)lay a recording
....... MENU .......
SET CLOCK
SET UP CHANNEL
IDIOMA/LANGUE
(ENGLISH)
SELECT ROTATE WHEEL
SET PUSH WHEEL
END PUSH MENU KEY
..... SET UP VCR .....
: ON
INPUT SELECT : TUNER
SET AUDIO MODE
SELECT ROTATE WHEEL
SET PUSH WHEEL
END PUSH MENU KEY
Press _ i_ ............
twice
to leave this screen.
To Cancel Repeat Play,
repeat steps
1 and 2, and select REPEAT PLAY • "OFF".
Then, press MENU to exit.
Notes
• When REPEAT PLAY : "ON" is selected, the VCR
will play to the end of a tape, or until it reaches a
blank portion 30 seconds or more. (Erased portions
of tape are not cons dered bank.) Then the VCR
will automatically rewind the tape and play t aga n
and again until you cancel repeat play.
• All function buttons (REW, FF, etc.) are operational
during Repeat Play.
22
1
2
3
With this feature, you can skip over commercials
recorded on a tape.
PressZER_'N Lt in Play mode.
The VCR will go into FF search mode and skip
over 60 seconds of recorded time.
Then, normal playback will resume.
DISPLAY
_ress 6 _1
to display the Time
Counter overlay.
STOP 12:00 AM CH O8
0:00:30
SLP
!
COUNTER
RESET
Press 0 _1_
to reset the Time
Counter to 0:00:00
at whatever point
you wish on the tape.
STOP 12:00 AM CH 08
0:00:00
SLP
in Stop mode.
The VCR will go into FF or REW mode.
The tape will stop at the last point the Time
Counter was set to 0:00:00.
Auto Playback
When a tape is inserted, the power comes on
(Auto). If the record tab* is removed, playback
begins (Auto).
Auto Rewind
After a tape reaches its end during playback,
fast forward or manual record, the VCR will
rewind it and go into Stop mode.
Playback Auto Eject
After a tape without a record tab* is played to its
end, the VCR will rewind and then eject the tape.
Memory Rewind Off
When the POWER button is pressed during
rewind, the VCR will turn off after rewind is
comp\ete.
Eject Cassette
A cassette may be ejected with power on or off.
* For record tab information, see page 23.