Then, Press - Panasonic Omnivision VHS PV-4564 Operating Instructions Manual

Blue *hUL_Lbel _,Jletters (ex. [] ~ P""_ ) cuJ_u_puJ_dwith told-out Control Relel ul _uc U,uide (tront pdyu).
A timer recording can be set up using the buttons on the
VCR. If necessary, the clock can also be set.
1
_W'SELECTA PROGRAM SET
Hold down [_
and press (_
to enter the program mode.
_ If the clock is not set, pressing
these buttons will display the
SET CLOCK screen.
In this case, proceed with step 2
to set the clock and then to sat
a timer recording.
STOP
.._ T- SET CLOCK ..... }
/ I "" DS[ . ON
BY SELECT • t • KEY
NEXT. PUSH SET KEY OR
TO END PUSH PROG KEY
Helpful Notes
• It is not possible to clear a timer program using
the VCR buttons. Please use the Remote Control.
• Press SET (FF) repeatedly to move to a particular
item for setting or correction.
• Once the VGR is in the Program mode, the
PLAY, REC, FF, and REW buttons on the VCR are
non- functional.
2
Press _ (for u p)
or _
(for down)
to make your selection.
Then,
press
_
to set and move on to the next item.
3
When tl_ei_i:og
press I_and
_ (at the same time)
to display all program contents.
4
Press [_
and (_
again
to return to the normal screen.
Or,
repeat steps 2 and 3
to set the next program,
20