Panasonic Omnivision VHS PV-4564 Operating Instructions Manual page 15

With the proper audio mode setting, your VCR can:
1) record and playback an MTS stereo broadcast (main language) in stereo Hi-Fi.
2) record and playback a monaural broadcast (main language) or a Second Audio Program (second language)
on the Hi-Fi tracks for better quality monaural sound.
3) playback non-Hi-Fi tapes in monaural.
Select the type of broadcast and sound track
you wish to record.
....... MENU .......
1 Press _ B
_=li grJ_g_e]_
to display the menu.
ROTATE TO SELECT ......
Use _ _ ....
2 "U;_T'° R
to first, select SET UP VC
from the menu, and then
to select SET AUDIO MODE.
SET CLOCK
SET UPCHANNEL
IDIOM_LANGUE
(ENGLISH)
SELECT ROTATE WHEEL
SET PUSH WHEEL
END PUSH MENU KEY
..... SETUP VCR .....
REPEAT PLAY : OFF
INPUT SELECT : TUNER
SELECT ROTATE WHEEL
SET PUSH WHEEL
END PUSH MENU KEY
: ..... ROTATE TO $ELEGT
: Use _'_
PUSH TO
SET
to select the type of
audio mode (STEREO/
SAP/MONO) as
.described on page 14.
f .... SET AUDIO MODE .... 1
/ _ : STEREO/
PLAY AUDIO : HIFi
/
/ SELECT ROTATE WHEEL /
/ SET PUSH WHEEL 1
LEND PUSH MENU KEY J
4" Press _
to exit this screen.
Do a recording .....
! ! i
See "Record On a Tape" section on page 10,
5
• You may monitor,:the recording in stereo, even if you
are watching a mono sound TV by using a stereo
amp and speakers. (See connection on page 14.)
SAP
Press
when receiving an SAP broadcast to switch
instantly from STEREO to SAP, or MONO to SAP
audio mode.
SAP appears for a few seconds if an SAP broadcast is
being received at the time the SAP button is pressed.
• Pressing the SAP button again will switch the audio
mode to the previously selected mode.
• The SAP button is specially designed so that it can be
easily' recognized by touch.
Select the type of sound you desire for playback.
Do steps I and 2 (left).
Then_ In step 3,
ROTATE TO SELECT
SELECT ROTATE WHEEL
to select Hi-Fi to listen to SET PUSH WHEEL
END PUSH MENU KEY
your stereo recordings with ,
stereo sound or MONO for monaural sound.
• Other settings in this screen are not related to
playback and can be left as is.
PUSH TO
SET
.... SET AUDIO MODE ....
AUDIO MODE : STEREO
: HIFI
See the "Play Back a Tape" section on page 9.
This feature allows you to enhance the s[ereu
sound so that it seems to completely surround you.
Note: Your VCR needs to be hooked up to a stereo TV I
or stereo amp/receiver with speakers (see page 14).
For playback, tapes must be recorded in Hi-Fi stereo.
For TV viewing, programs must be broadcast in stereo.
Set :.:o., .Bq..° i ]11 ,,,,,,zo ..-- to: • ,or • •
for medium, or maximum effect.
Then, set I_1 to OFF
when not using this feature.
Portions of this product manufactured under a license from
Desper Products, Inc. SPATIALIZER, and the circle-in-square
device are trademarks owned by Desper Products, Inc.
Helpful Notes
• When purchasing or renting prerecorded tapes,
remember that only those recorded in Hi-Fi stereo will
play back with true stereo sound. Standard stereo
tapes will play back with monaural sound.
• If "STEREO" is selected in the SET AUDIO MODE
screen, the MONO indicator will not appear on-screen
regardless _I a mono broadcast is being received.
* I! the Stereo broadcast is weak and display flickers,
you may get better results if you select MONO as the
AUDIO MODE in step 3, left.
. In order to listen to Hi-Fi stereo playback, the VCR
AUDIO (L/R) jacks must be connected to a stereo TV
or stereo amp and speakers. (See page 14.)
• When adjusting the tracking during playback, the
Hi-Fi audio sound may revert to normal audio sound.
This is normal.
• There may be a difference in audio level between
Hi-Fi and normal audio playback.
15