Craftsman 315.248200 Owner's Manual page 13

The following tools are needed for assembly and alignment, Note: The five hex keys listed below have been
provided with your saw. The remaining tools are typical shop tools and are not included with your saw.
SMALL I MEDIUM
PHILUPS SCREWDRIVER
NUTDRIVER
8 ram,t0 mm,and12mm
HEXI_EYS (PROVIDED)
and6mm
COMBINATION S QUARE
45°TRIANGLE
HAMMER
_WRE_HES: 8 .m, ,Omm,and_2 mm _¢_
FRAMING SQUARE
ADJUSTABLE WRENCH
13 CRR FTSNIIW TABLESAW315.228390