Listening To A Cassette Tape (Tape 2) - Sharp CD-XP500A Operation Manual

Listening to a cassette tape (TAPE 2)

1
Press the ON/STAND-BY button to turn the power on.
2
Press the TAPE (1 2) button to select TAPE 2.
3
Open the cassette door by pushing
the area marked " PUSH EJECT".
4
Load a cassette into the TAPE 2 cas-
sette compartment with side A facing
you.
5
Press the button to choose one
side or both sides.
... To listen to both sides.
... For endless repeat play of both sides.
... To listen to one side.
6
Press the ( ) button to listen to side A, or the
B.
To play both sides ( ), start from side A. When playback starts from side B, side
A will not be played.
To stop playback:
Press the button.
Fast forward/rewind on side A:
To advance the tape, press the / button. To rewind it, press the
ton.
Fast forward/rewind on side B:
To advance the tape, press the / button. To rewind it, press the
ton.
Caution:
" To remove the cassette, press the
button, and then open the compartment.
" Before changing from one tape operation to another, press the
" If a power failure occurs during tape operation, the tape head will remain engaged
with the tape and the cassette door will not open. Wait until the power is restored.
02/3/11 CD-XP500A(A)2.fm
CD-XP500A
ENGLISH
button for side
/ but-
/ but-
button.
E-18
General control (See page 10.)