Listening To A Cd (Cds) - Sharp CD-XP500A Operation Manual

Listening to a CD (CDs) (continued)
CD-XP500A
ENGLISH
" To locate the beginning of a track
To move to the beginning of the next track:
Press the / button for less than 0.5 seconds during playback.
! You can skip to any track by pressing the
sired track number appears.
To restart the track being played:
Press the / button for less than 0.5 seconds during playback.
! You can skip to any track by pressing the
sired track number appears.
Notes:
! You can locate the beginning of a track on a single disc only.
! The
PRESET / or PRESET
allows you to locate the beginning of a track.
" To locate the desired portion
For audible fast forward:
Press and hold down the /
For audible fast reverse:
Press and hold down the /
Notes:
! Normal playback will resume when the
! You can locate the desired portion on a single disc only.
! When the end of the last track is reached during fast forward, "END" will appear on
the display and CD operation will be paused. When the beginning of the first track
is reached during fast reverse, the unit will enter the playback mode.
! The
PRESET / or PRESET
allows you to locate the desired portion.
E-13
/ button repeatedly until the de-
/ button repeatedly until the de-
/ button on the remote control
button during playback.
button during playback.
/ or / button is released.
/ button on the remote control
" Starting playback with a desired track
You can play a disc starting with the desired track.
1
Whilst in the stop mode, press one of the
remote control or DISC SKIP button to select the desired disc.
2
Press the / or / button to select the desired track.
Selected disc number
Selected track number
You can also select a track by pressing the
/ button on the remote control.
3
Press the ( ) button to start playback.
Playback of the selected track is started. When the end of last track of the disc
selected is reached, the next disc will be automatically started.
Notes:
! When the DISC SKIP button is pressed during playback, the next disc will begin
automatically.
! When one of the
1 - 3 buttons on the remote control is pressed during play-
back, the selected disc will begin automatically.
Caution:
! Do not place two CDs in one disc tray.
! Do not play discs with special shapes (heart- or octagon-shaped). It may cause
malfunctions.
! Do not push the disc tray whilst it is moving.
! Do not turn the disc tray by hand. This may cause malfunctions.
! If the power fails whilst the tray is open, wait until the power is restored.
! If the disc tray is stopped forcibly, "ER-CD10" will appear on the display for 3 sec-
onds and the unit will not function. If this occurs, press the ON/STAND-BY button
to enter the power stand-by mode and then turn the power on again.
! If TV or radio interference occurs during CD operation, move the unit away from
the TV or radio.
! If a disc is damaged, dirty, or loaded upside down, the disc will skip.
02/3/11 CD-XP500A(A)2.fm
1 - 3 buttons on the
PRESET / or PRESET