Table of Contents
Advertisement
Listening to a cassette tape (TAPE 1 or TAPE 2)
Before playback:
l For playback, use normal or low-noise tapes for
the best sound. (Metal or CrO tapes are not
recommended.)
l Do not use C-120 tapes or poor-quality tapes, as
they may cause malfunctions.
l Before loading a tape into the cassette compart-
ment, tighten the slack with a pen or a pencil.
MINI COMPONENT SYSTEM CD-MPX100W
DISPLAY
n Tape 1 playback
1
Press the ON/STAND-BY button to turn the power on.
2
Open the cassette com-
partment
by
pushing
the area marked " ".
3
Load a cassette into the
TAPE 1 compartment or
TAPE 2 compartment
with the side to be
played facing towards
you.
TAPE 1
4
Press the TAPE (1
2) button to select the cassette you
want to listen to.
5
Press the
/
to start
playback.
Auto power on function:
When you press any of the following buttons, the unit turns on.
l TAPE (1
2) button (main unit and remote control): The unit turns
on and the "TAPE" function is activated.
l
/
button (main unit and remote control): The unit turns on and
playback of the last function starts (CD, TAPE, TUNER, VIDEO/
AUX).
Auto power off function:
In the stop mode of tape operation, the main unit enters the stand-by
mode after 15 minutes of inactivity.
10/3/05
MPX100EE_1.fm
CD-MPX100E
TAPE 2
Tape play indicator
23
TINSEA093AWZZ
Advertisement
Table of Contents
