Sharp AR-M256 Operation Manual page 62

TROUBLESHOOTING AND MAINTENANCE
Message
SELECTED PAPER TRAY IS OUT
OF SERVICE.
CHECK STAPLER POSITION OR
STAPLE JAM.
(CALL FOR SERVICE SOON.)
(MAINTENANCE REQUIRED.)
CALL FOR SERVICE.
CODE:
PLEASE CHECK THE ORIGINAL
SIZE. JOB IS CANCELED.
60
Cause and solution
Contact your authorised service representative.
Staples are jammed in the finisher or the staple case is not
attached correctly. Check the staple case. If the message still
appears after removing the jammed staples, disable the stapler
using "DISABLING OF STAPLER" in the key operator programs
(See the "Key operator's guide.), and contact your authorised
service representative.
It will soon be time for regular maintenance. Contact your
authorised service representative.
It is time for regular maintenance. Contact your authorised service
representative.
Turn off the power and then turn it back on. If this does not clear
the message, write down the 2-digit main code and 2-digit
sub-code and promptly contact your authorised service
representative.
The original in the RSPF is longer than the size that was detected.
Reinsert the original, make sure that the size indicated in the
touch panel is the same as the actual size, and begin copying. You
can also select mixed feeding to copy onto paper that matches
each original size after all originals have been scanned.
Page
-
75
-
-
-
-