Using The Rspf - Sharp AR-M256 Operation Manual

COPY FUNCTIONS
5
Make sure that a suitable paper size is
automatically selected, or select
another size using the [PAPER
SELECT] key.
EXPOSURE
AUTO A4
PAPER SELECT
100%
6
Select the number of copies and any
other desired copy settings, and then
press the [START] key (
ACC.#-C

USING THE RSPF

1
Place the original(s) in the document
feeder tray. (p.23)
2
Touch the [2-SIDED COPY] key.
2-SIDED COPY
OUTPUT
3
Touch the desired copy mode.
Y TO COPY.
D COPY
Touch the [BINDING CHANGE] key when making the
tablet binding, or when making automatic two-sided copies
of a one-sided A3 or B4 (11" x 17" or 8-1/2" x 14") size
portrait original, touch the [BINDING CHANGE] key.
Portrait-oriented original
(A3 or B4 (11" x 17" or 8-1/2" x 14") size)
Before [BINDING CHANGE]
28
).
The original for the front
side is scanned.
BIN
CH
After [BINDING CHANGE]
7
Remove the first original and then place
the original for the back side on the
document glass. Close the document
cover/RSPF and then press the [START]
key ( ).
When making two-sided copies of an odd
Note
number of originals, touch the [READ-END]
key after scanning the last original.
4
Touch the [OK] key.
OK
BINDING
CHANGE
5
Make sure that a suitable paper size is
automatically selected, or select
another size using the [PAPER
SELECT] key.
EXPOSURE
AUTO A4
PAPER SELECT
100%
6
Select the number of copies and any
other desired copy settings, and then
press the [START] key (
ACC.#-C
To cancel automatic
two-sided copying, press
the [CLEAR] key ( ).
).