Hughes BGAN HNS-9201 Getting Started Manual page 22

22/34 Getting Started with the HNS 9201
•
For equipment that sends and receives data as Unrestricted Digital Information (UDI) or
as Restricted Digital Information (RDI), use MSN 3.
Refer to the instructions supplied with your ISDN equipment for information on the
equipment capability and how to program the appropriate MSN.
Select Terminal > ISDN Interface Settings from the BGAN LaunchPad main menu.
2.
The Configure ISDN Interface dialog box is displayed, as shown below:
Select the Enable Interface check box to activate the ISDN interface or uncheck the
3.
check box to deactivate the interface.
Do one of the following:
4.
•
For a 3.1 KHz audio call, enter
this is the option you use if you are connecting a Group 3 fax machine to the ISDN
port.
•
For an Unrestricted Digital Information (UDI) call (64kbps ISDN), enter 3 into the
MSN UDI number: text box. Check the documentation supplied with your device
for details on whether it is a UDI device.
•
For a Restricted Digital Information (RDI) call (56kbps ISDN), enter 3 into the MSN
RDI number: text box. Check the documentation supplied with your device for
details on whether it is an RDI device.
Click OK to save the changes, or Cancel to exit without saving.
5.
Connect the ISDN equipment to the ISDN port on the BGAN terminal using the ISDN
6.
cable supplied with the terminal.
into the MSN audio number: text box. Typically,
2