Configure - HP StorageWorks 8B - FC Entry Switch Reference Manual

configure

Modify system configuration settings.
Synopsis
configure
Availability
admin
Description
Use this command to change the following system configuration settings:
•
Fabric parameters
•
Virtual channel settings
•
Switch Operating Mode
•
Zoning Operation parameters
•
RSCN Transmission Mode
•
NS Pre-zoning Mode
•
Arbitrated Loop parameters
•
System services
•
Portlog events enable
Note:
The configure command is navigated using a series of menus. Top level menus, and associated
submenus consist of a text prompt, a list of acceptable values, and a default value (in brackets).
Use the following options to control input:
Return
Interrupt (control-C)
End-of-file (control-D)
Fabric Parameters
There are a number of settings which control the overall behavior and operation of the Fabric.
Some of these values, such as the domain, are assigned automatically by the Fabric and may differ
from one switch to another in the fabric. Other parameters, such as the BB credit, can be changed
for specific applications or operating environments, but must be in agreement among all switches
to allow formation of the fabric.
Fabric OS Reference
Do not run this command on an operational switch. First disable the switch using the
switchDisable command.
When entered at a prompt with no preceding input, accepts the default value (if
applicable) and moves to the next prompt.
Aborts the command immediately and ignores all changes made.This keystroke
is common on many computers, but can be different on your system.
When entered at a prompt with no preceding input, terminates the command and
saves changes made.This keystroke is common on many computers, but may be
different on your system.
1
Telnet Commands
1-39