Fanshow - HP StorageWorks 8B - FC Entry Switch Reference Manual

fanShow

Display fan status.
Synopsis
fanShow
Availability
All users
Description
Use this command to display the current status of the switch fans.The format of the display varies
according to the switch model and number of fans. Some switch models show fan speed measured
in RPM (revolutions per minute).
Fan status is shown as:
OK
absent
below minimum Fan is present but rotating too slowly or stopped.
Operand None.
Example To display the status and RPMs for the fans:
See Also
psShow
tempShow
Fabric OS Reference
Fan is functioning correctly.
Fan is not present.
switch:admin> fanShow
Fan #1 is OK, speed is 8220 RPM
Fan #2 is OK, speed is 8400 RPM
Fan #3 is OK, speed is 8130 RPM
Fan #4 is OK, speed is 8310 RPM
Fan #5 is OK, speed is 8220 RPM
Fan #6 is OK, speed is 8430 RPM
switch:admin>
1
Telnet Commands
1-69