HP StorageWorks 8B - FC Entry Switch Reference Manual page 215

fl_cf_full
fl_cf_na
fl_trig_age
fl_trig_lp
open
transfer
opened
starve_stop
fl_tenancy
nl_tenancy
frame_nozone
Operands
This command has the following operand:
port
Example
To display a port with only the basic set of statistics:
See Also
portErrShow
portShow
Fabric OS Reference
Number of CFIFOs full stalls.
CFIFO not available stalls.
Number of age count triggers.
Number of loop not busy triggers.
Number of times the FL_Port entered OPEN state.
Number of times the FL_Port entered TRANSFER state.
Number of times the FL_Port entered OPENED state.
Loop tenancies stopped due to starvation.
Number of times FL_Port had loop tenancy.
Number of times NL_Port had loop tenancy.
Frames rejected due to zone protection.
Specify the port number to be displayed. Valid values for port number vary
depending on the switch type. This operand is required.
switch:admin> portStatsShow 3
stat_wtx 1181994
stat_wrx 1188458
stat_ftx 95830
stat_frx 15564
stat_c2_frx 0
stat_c3_frx 93
stat_lc_rx 7735
stat_mc_rx 0
stat_mc_to 0
stat_mc_tx 0
tim_rdy_pri 477
tim_txcrd_z 0
er_enc_in 0
er_crc 0
er_trunc 0
er_toolong 0
er_bad_eof 0
er_enc_out 3
er_disc_c3 0
4-byte words transmitted
4-byte words received
Frames transmitted
Frames received
Class 2 frames received
Class 3 frames received
Link control frames received
Multicast frames received
Multicast timeouts
Multicast frames transmitted
Time R_RDY high priority
Time BB_credit zero
Encoding errors inside of frames
Frames with CRC errors
Frames shorter than minimum
Frames longer than maximum
Frames with bad end-of-frame
Encoding error outside of frames
Class 3 frames discarded
1
Telnet Commands
1-201