Configure The Storage System; Configure Networking; Provisioning Storage - HP StoreEasy 1000 Storage Administrator's Manual

c. Re-enter the Administrator password in the Confirm password box.
d. Click the blue arrow next to the Confirm password box.
e. Click OK.
After the Administrator password has been set, the storage system completes the installation
process.
3. When prompted, press CTRL+ALT+DELETE to log on to the system. If using iLO, click the
Ctrl-Alt-Del menu item in the Keyboard menu of the remote console.

Configure the storage system

The ICT (Initial Configuration Tasks) window launches automatically at logon for any user who is
a member of the local administrators group.
Use ICT to perform the following tasks:
Update system settings, such as changing the local administrator password, time zone, and
so on.
Launch Network Configuration wizard to configure and validate the network configuration.
Configure email alerts and register for HP proactive notifications.
Add and save reseller information.
Create storage pools and volumes.
Enable software updates and enhancements directly from Windows update.
Register for a free trial of Autonomy LiveVault and get more information on Vision Solution
Double-Take Availability Information products.
For more information on any of these tasks, click the help button for the respective task group in
the ICT window.

Configure networking

The NCT (Network Configuration Tool) wizard enables you to configure the network interfaces on
HP StoreEasy 1000 Storage. NCT analyzes all available network interfaces of the StoreEasy system
and allows you to choose different network configurations to reduce the chances of any incorrect
configuration. It also validates the configuration to help troubleshoot errors in the networking
environment. HP strongly recommends that you use this tool to configure network interfaces.
Use NCT to perform the following tasks:
Change the network interface settings.
Configure network teams.
Configure VLAN assignments and assign VLAN IDs.
Configure the IP address for the selected interface.
Confirm network settings and diagnose environmental network issues using the network
validation system.
For more information on any of these tasks, click Help for the respective task in the NCT window.

Provisioning storage

Storage provisioning involves the following tasks:
Create storage pools
Create virtual disk
Create volumes
Configure the storage system 37