Part Names and Functions
Front/Top
Zoom ring (p.10)
Adjusts the image size.
Focus ring (p.13)
Adjusts the image focus.
Lamp cover (p.46)
Open this cover when replacing
the lamp unit inside the projector.
Lamp cover opening switch
(p.46)
Slide this switch to unlock the lamp
cover when removing it.
Security lock (
(p.60)
Air exhaust vent
Remote control light-
receiving area
( Setup Guide )
Receives signals from the
remote control.
Front adjustable foot
(p.10)
Extend and retract to adjust
the projection angle.
)
Lens cover
Attach when not using the
projector to prevent the lens from
becoming dirty or damaged.
Front/Top
Rear
Remote control
Control panel
Base
Temperature indicator
(p.35)
Indicates abnormalities in the
internal projector temperature.
Lamp indicator (p.35)
Indicates a problem with the
projection lamp or that the lamp
needs to be replaced.
Operation indicator
(p.35)
Flashes or lights to indicate the
operating status of the projector.
Control panel (p.56)
Handle
Hold this handle when
lifting and transporting the
projector.
Foot adjust button (p.10)
Press this button while lifting up
the projector in order to make
fine adjustments to the adjustable
foot or to retract it.
55