Setting Menu - Epson EMP-TW100 User Manual

Using the Menu Functions
Main menu
Advanced

Setting Menu

Video
Advanced
Setting
About
Reset All
Select
Main menu
Setting
30
Sub-menu
Input B Selects the type of signal being input to the Input B port.
Setup Level (Adjustment is only possible when composite, S-Video, 525i/p or 625i/p
signals are being input.)
If using a foreign product that has different black level (setup level)
settings, use this function to obtain correct images. Check the specifications
of the connected equipment when changing this setting.
Reset Returns the adjustment values in the "Advanced" menu to the default
values.
Press the [Select] on either the projector's control panel or the remote
control to display the confirmation screen, and select "Yes".
Select "Reset All" to return all menu settings to their default settings.
(p.32)
Keystone 0 -
No-Signal Msg.
OFF Black Blue Logo
Startup Screen ON OFF
Blank Black Blue Logo
Sleep Mode OFF 1min. 5min. 10min.
Projection
Select
English
Language
Select
Reset Execute
Enter
Sub-menu
Keystone Corrects keystone distortion in images. (p.11)
When keystone correction is carried out, the projected image will become
smaller.
The keystone correction settings are memorized, so that if you change the
position or angle of the projector, you may need to readjust the keystone
correction setting.
If the images become uneven in appearance after keystone correction is
carried out, decrease the "Sharpness" setting.
No-Signal Sets the screen status when no video signal is being input.
Msg. OFF :Screen is completely black.
Black :Screen is completely black and a no signal message appears.
Blue :Screen is completely blue and a no signal message appears.
Logo :The user's logo is displayed and a no signal message appears.
Startup Sets whether the startup screen is displayed or not.
Screen
Blank Sets the screen status when the [Blank] button on the remote control is
pressed. The screen status can be selected from "Blue", "Black" or "Logo".
Sleep Mode Use this function if you would like the projector's power to switch off
automatically when image signals stop being input from the connected
equipment.
Setting value range : OFF, 1 minutes, 5 minutes, 10 minutes
When set to "ON": If the connected equipment has a timer off function,
and this function operates to stop the image signal from being input to the
projector, the projector's lamp also turns off automatically. This can be
used to ensure that the lamp turns off even if the viewer falls asleep while
viewing.
When sleep mode has been activated so that the projector is in standby
mode, the lamp will not automatically turn back on again even if a image
signal is input once more. Press the [Power] button on either the remote
control or the projector's control panel to turn the power back on.
Function
+
Function
Default
setting
RGB
Depends on
countries
-
Default
setting
0
Blue
ON
Black
OFF