Using the Menu Functions
Computer (D-RGB/A-RGB DVI-I, InputB (A-RGB))
Computer
Video
Advanced
Setting
About
Reset All
Select
Main menu
About
Reset All Menu
Video
Advanced
Setting
About
Reset All
Select
Main menu
Reset All
32
Lamp
0H
Reset Lamp Timer
Execute
Video Source
Input Signal
Frequency
H
kHz
V
Hz
SYNC Polarity
H
V
SYNC Mode
Resolution
x
Refresh Rate
Hz
Enter
Sub-menu
Lamp
Displays the cumulative lamp operating time.
When the lamp warning period is reached, the display characters appear in red.
Reset Lamp
Initializes the lamp operating time when the lamp is replaced. When this
Timer
command is selected, the cumulative lamp operating time is reset to the
initial default value.
Video Source Displays the image source which is currently being projected.
Input Signal
Displays the input signal settings.
Frequency
Displays the horizontal scanning frequency.
SYNC
Displays the synchronization
Polarity
SYNC Mode
Displays the synchronization attributes.
Resolution
Displays the input resolution.
Refresh
Displays the refresh rate.
Rate
Execute
Enter
Sub-menu
Execute
Resets all items in all environment setting menus to their default settings.
Press the [Select] on either the projector's control panel or the remote
control to display the confirmation screen, and select "Yes".
To return the settings for items in menus such as the "Video" and
"Advanced" menu to the default settings, select "Reset" in the respective
sub-menus.
The Lamp and Language settings will not return to their default settings.
Video menu
Setting menu
Advanced menu
About menu
Function
polarity.
Function
Reset All menu
Default
setting
0H
-
Depends on
connection
-
-
-
-
-
-
Default
setting
-