Adjusting The Image Quality; Focusing The Screen Image; Selecting The Color Mode - Epson EMP-TW100 User Manual

Adjusting the Image Quality

The quality of the screen images can be adjusted as follows.

Focusing the Screen Image

Procedure
Focus ring

Selecting the Color Mode

The following five color modes have been preset for use with images with varying characteristics. You can
use these color modes to obtain the optimum image quality easily, just by selecting whichever color mode
best suits the images. The brightness of the projected images will vary depending on the mode.
Mode name
Dynamic
Theatre
Natural
PC
sRGB
Procedure
Projector
Gamma Color Temp
Original 1 6700 K Color
(adjustable)
Original 2 6700 K Color
(adjustable)
2.2 6700 K Color
(Basic) (adjustable)
2.2 7500 K Brightness Ideal for use in making images as bright as possible when
(Basic) (adjustable)
2.2 6500 K (fixed) Color
(Basic)
Remote control
Theatre
Focusing the
Screen Image
Selecting the
Color Mode
Turn the focus ring to adjust the image
focus.
If the surface of the lens is dirty or misted
over as a result of condensation, it may
not be possible to adjust the focus
correctly. If this happens, clean or de-mist
the lens. (p.44)
If the projector is positioned outside the
normal projecting range of 0.9 - 13 m (2.9
- 42.6 ft.), it may not be possible to obtain
the correct focus. If you have trouble
obtaining the correct focus, check the
projection distance.
Priority
element
Ideal for projecting images with greater modulation and
intensity.
Ideal for enjoying presentations such as movies which have
large numbers of dark scenes.
Ideal for enjoying presentations in a natural atmosphere.
projecting computer images.
Images conform to the sRGB standard. If the connected video
source has an sRGB mode, set both the projector and the video
source to sRGB.
The color mode changes as shown
below each time the [Colortune] button
on either the remote control or the
projector's control panel is pressed.
Dynamic Theatre
The current setting appears on the screen each
time the color mode changes.
The color mode setting can also be
changed using the "Color Mode" item of the
projector's "Video" menu. (p.25, 27)
Selecting the Image
Aspect Ratio
Automatic Adjustment
of Computer Images
Use
Natural PC sRGB
13