Mail Notification Settings - Epson EMP-8300 User Manual

Projector Monitoring and Control using a Network Projector Monitoring and Control using a Network

Mail Notification Settings

PROCEDURE
With Windows running, click [Start], point to
1
[Programs] (or [All Programs]), point to [EPSON
Projector] and then click [EMP NetworkManager].
EMP NetworkManager will start up.
Double-click the icon for the projector to set mail
2
notification for.
If the name for the required projector is not displayed, refer to
"Connecting Manually".
Projector EMP482800... PROJECTOR01 PROJECTOR02 PROJECTOR03
address... 192.168.0.8 169.254.10.176 169.254.10.177 169.254.10.178
Room202 Room301 Room302 Room303 Room401
169.254.207.65 169.254.207.66 169.254.207.67 169.254.207.68 169.254.207.69
If a password has been set, the password entry dialog box will
be displayed.
p.107
Room201
169.254.207.64
Connection of the projector will start, and the following
3
Setup for Network Projector window will be displayed.
If "DHCP" is set to "OFF", the settings for the "Network"
function in the "Advanced2" menu will be displayed. Make any
changes that are necessary.
In addition, the "Projector name" setting that does not appear in
the projector's configuration menu can be set here instead.
The Projector Name is a unique name that is used to distinguish
the projector from other projectors on the network.
The name can consist of up to 15 single-byte characters.
Unicode characters, numerals and the following symbols can be
used.
! @ # $ % ^ & ' . - _ { } ~
Once the network settings for the projector have been
4
completed, click [Mail Notification Setting] and make
the settings for mail notification such as the
notification destinations.
104