Ssid Display; Ip Address Display; Ipv6 Settings; Mail Notification - Epson EB-PU2116B User Manual

Table of Contents

Advertisement

Network Menu
• for the Gateway Address: 0.0.0.0, 127.x.x.x, or 224.0.0.0 through
255.255.255.255
(where x is a number from 0 to 255)

SSID Display

Network > Network Configuration > Wireless LAN > SSID Display
s
You can select whether to display the SSID on the network standby screen
and Home screen.

IP Address Display

Network > Network Configuration > Wireless LAN > IP Address
s
Display
Network > Network Configuration > Wired LAN > IP Address Display
s
You can select whether to display the IP address on the network standby
screen and Home screen.

IPv6 Settings

Network > Network Configuration > Wireless LAN > IPv6 Settings
s
Network > Network Configuration > Wired LAN > IPv6 Settings
s
You can select IPv6 settings when you connect the projector to the network
using IPv6.
IPv6
Set to On to connect the projector to the network using IPv6.
One local link address is always set while using IPv6. This is composed of
the interface ID created from fe80:: and the projector's MAC address.
IPv6 is supported to monitor and control the projector over a network
using Epson Web Control and PJLink.
Auto Configuration
Set to On to assign addresses automatically according to the Router
Advertisement.
The address is composed as shown below.
Stateless Address (0 to 6)
Created automatically by combining the prefix acquired from the RA
(Router Advertisement) and the interface ID created from the
projector's MAC address.
Stateful Address (0 to 1)
Created automatically from the DHCP server using DHCPv6.
Use Temporary Address
Set to On if you want to use a temporary IPv6 address.
You can set the IPv6 address manually in the Advanced menu in
Epson Web Control.
a

Mail Notification

Network > Network Configuration > Notifications > Mail Notification
s
Set to On to send an email to the preset addresses when a problem or warning
occurs with a projector.
g g Related Links
• "Network Projector E-mail Alert Messages"

Network Projector E-mail Alert Messages

When a problem occurs with a projector on the network, and you selected to
receive e-mail alerts, you receive an e-mail containing the following
information:
• The email address set in From as the mail sender
• Epson Projector in the subject line
• The name of the projector experiencing a problem
111
p.111

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eb-pu2113bEb-pu2113w

Table of Contents