Projector Monitoring and Control using a Network
Projector Monitoring and Control using a Network
When the installation is complete, the display will
4
return to the window that appeared in step 3. If you
would like to install other software, select the
required software and then click [
Once you have finished installing the software, click [
Uninstalling the software
To uninstall the projector software, select "Control Panel" from "My
Computer", double-click "Add/Remove Programs" (or "Add or Remove
Programs" if you are using Windows XP), select the programs to be
uninstalled, and then click [Add/Remove] (or [Change/Remove] if you are
using Windows XP).
TIP
EMP Monitor and EMP NetworkManager cannot be uninstalled
simultaneously. Uninstall them one at a time.
Network Cable Connections
The projector can be connected to a network using a commercially-
available 100baseTX or 10baseT network cable.
].
].
To network port
You must use a Category 5 shielded twisted-pair cable to connect the
network to prevent malfunction.
Network cable
(commercially-available)
CAUTION
101
To Network port