Epson EMP-8300 User Manual page 91

Using the Configuration Menu Functions Using the Configuration Menu Functions
Sub-menu
Color Adjusts the colour temperature
Adjustment (red, green, blue) colour for each input source.
•Color Temp.: Lets you adjust bright colours within a range
from reddish tinges to bluish tinges.
If the colour temperature is lower, colours
appear reddish and colour tones appear
softer.
If the colour temperature is higher, colours
appear bluish and colour tones appear
sharper.
Press the [Enter] button on the remote
control or the [Auto/Enter] button on the
projector's control panel and make the
adjustment.
•RGB : Press the [Enter] button on the remote
control or the [Auto/Enter] button on the
projector's control panel, select "R" (red),
"G" (green) or "B" (blue) and make the
adjustment.
Make the adjustment while viewing the stats
of the image on the screen.
This item cannot be selected if "sRGB" has been selected as
the "Color Mode" setting in the "Video" menu.
Black Adjusts the brightness of dark shades without affecting the
Level brightness of light shades. This is used to adjust the black
level (brightness of dark shades) for projected images when
several projectors are all being used together for projection
at times such as during shows.
White Adjusts the brightness of light shades without affecting the
Level brightness of dark shades. This is used to adjust the white
level (brightness of light shades) for projected images when
several projectors are all being used together for projection
at times such as during shows.
Rear Proj. Use when projecting images from behind a translucent
screen.
When set to "ON", the projected images are horizontally
reversed.
Function
and intensity of each RGB
90
Default
Color Temp.:
Depends on
connection
Median value (0)
Median value (0)
OFF