Replacing The Lamp - Epson EMP-7100 Owner's Manual

4. The air filter is attached to the inside of the filter cover. To clean
the filter you are advised to use a small vacuum cleaner designed
for computers and other office equipment. If you do not have
one, use a dry, lint-free cloth.
If the dirt is difficult to remove or if the filter is torn, replace it.
Replacement lamps come with an air filter.
Contact your EMP dealer or call an EPSON Service Centre.
Be sure to request part number.
5. Replace the filter.
6. Plug the power cable back into the wall socket.

Replacing the Lamp

The projector lamp typically lasts for about 2000 hours of use. Replace
the projector lamp whenever any of the following situations occur.
We recommend you to purchase a spare lamp since the projector
lamp may exhaust before its normal life depend on each lamp
characteristic and usage.
• Whenever you feel the projected image is too dark or dim, even
though the current projector lamp has not reached the end of its
life.
• Whenever the REPLACE LAMP indicator appears on the screen
when the projector lamp comes on.
• Whenever the lamp indicator flashes orange and red alternately to
indicate that the projector lamp has reached the end of its life.
• Whenever the lamp indicator lights up red or the projector lamp
fails to light.
74 5 • Maintenance