Epson EMP-7100 Owner's Manual page 64

Counts of frames, Time
Pressing the remote control's Click 1 button while strobe display is
being performed displays a screen for specification of the counts
frames and the time interval. You can set the frame count to 4, 9 or
16, and the time interval from 0.1 to 1 second in 0.1 second incre-
ments.
Press the remote control's Click 2 button again to clear the setting
screen.
RESET ALL
Executing this command resets the settings in all menus to their
factory defaults.
Select this item and then press a Click button or the <Enter> button
to display the confirmation screen.
Next, select Yes and then press a Click button or the <Enter> button
to reset all menu items.
If you change your mind, select No and then press a Click button or
the <Enter> button to clear the confirmation screen without chang-
ing any settings.
46 3 • Using the Menus