Getting The Most Out Of Your Projector - Epson EMP-7100 Owner's Manual

Getting the Most Out of Your Projector

The projector comes with a full set of features that allow you to
control the settings for the image display, video and audio. To get the
most out of your projector read this section for a quick summary of
the important features.
Remote control
The buttons on the remote control allow you to turn the projector
on and off, an provide direct access to auto set-up, blank, freeze,
volume, mute and image source switching. Remote control buttons
can also be used for custom functions and to access the projector's
menu system. The remote control can even be used instead of your
computer's mouse to control your computer.
• To use the remote control as a wireless mouse, connect the
projector to your computer with the main cable and mouse cable
(connect to computer's mouse port).
• To use additional functions with images from a computer, connect
the projector to your computer with the main cable and a serial
cable (connect to computer's serial port).
Note: Connect the projector to your computer with all the cables that
came with the ELP Link II cable set so that you can use the remote
control as a cordless mouse.
Sleep mode
The sleep mode conserves electricity by automatically turning off the
lamp if the projector does not receive video input signal for specified
period (default is 30 minutes). In the sleep mode, the projector
remains on but the lamp is turned off, conserving electricity, cooling
the projector and extending the life of the lamp.
Use the Power button to turn the projector on and off.
viii Introduction