Screen Image Position - Epson EMP-7100 Owner's Manual

Screen Image Position

If you need to raise or lower the image on the screen, extend or
retract the front foot on the bottom of the projector.
1. While standing behind the projector and supporting the front of
it by holding the handle located below the lens, press down on
the foot release button. This unlocks the front foot, allowing it to
move up and down freely. Take care that the projector does not
suddenly drop down at this time.
2. While pressing the foot release button, raise and lower the
projector until the screen image is positioned the way you want
it.
3. Release the foot release button to lock the front foot in its
present position.
4. Rotate the left foot at the back of the projector to fine-tune the
position of the projected image.
Note: This foot is locked. You will need to unlock it before it can be
rotated.
22 2 • Using the Projector