Connecting To A Computer - Epson EMP-7100 Owner's Manual

When replacing batteries, take the following precautions:
• Do not mix old and new batteries.
• Do not recharge used batteries or expose batteries to fire or water.
• Replace batteries as soon as they run out. If the batteries leak,
wipe away the fluid with a soft cloth. If battery fluid gets onto
your hands wash them immediately.
• Remove the batteries if you will not be using the projector for a
long period.

Connecting to a Computer

You can connect the projector to a computer capable of SVGA, VGA,
SXGA and XGA (EMP-7100), SVGA, VGA and XGA (EMP-5100)
output. Resizing is supported for VGA, SVGA and SXGA (EMP-7100),
VGA and XGA (EMP-5100) output. Below a list may be found of the
types of computers supported by this projector.
• IBM desktop PC or compatible
• IBM laptop or compatible
• Apple Macintosh desktop computer, including Macintosh
Quadra
• Any Apple PowerBook with video-out capability, including all
160, 165, 180 and 500 series PowerBooks
® , Macintosh Centris ® , and Power Macintosh
Connecting to a Computer
7