Managing and Configuring the NAS 8000 Backup Agent
You can use Command View NAS to select snapshot behavior during backup or to
set agent parameters that could be necessary in special cases.
Note:
Data Protector name change.
1. In Command View NAS, click the Applications tab.
2. Navigate to OmniBack Backup.
3. Select Actions > Manage/Configure Application. The following window
Figure 18: Managing OmniBack II Agent
The table below explains each of the window's fields.
HP StorageWorks NAS 8000 User's Guide
For this release, the Command View NAS has not been updated to reflect the
appears:
Enabling Virus and Backup Software
169