Configuring Your System and Network
Starting and Stopping a Node
Note:
To start or stop a node:
1. In Command View NAS, click the Configuration tab.
2. Under High Availability, select HA Properties.
3. Select Actions > Start or Stop Node.
4. From the pull-down menu in the dialog box, select the node you wish to start
5. If the node is running, the text under the selected node says Stop <node
6. Click OK to start or stop the appropriate node.
74
Applies to high-availability NAS solutions only.
or stop.
name> now. If the node is not running, the text under the selected node will
say Start <node name> now.