Managing Group Quotas; Managing A Group Default Quota - HP StorageWorks 8000 - NAS User Manual

Managing Group Quotas

To view and edit group quotas on the NAS server:
1. In the Command View NAS, click the Storage tab.
2. Under File Volumes, select Quotas.
3. In the table that appears in the main window, expand the file volume for which
4. Double-click Group Quotas - Default to display a list of groups that have
You can refresh the information in the table by clicking Actions > Refresh.

Managing a Group Default Quota

To edit Group Quotas - Default settings:
1. In Command View NAS, click the Storage tab.
2. Under File Volumes, select Quotas.
3. Expand the desired file volume.
4. Select Group Quotas - Default.
5. Select Actions > Manage Group Default Quota.
6. Either check the No Space Limit box, or uncheck the box and type in values
7. Set the grace period in increments of days, hours, or minutes.
8. Click OK to save the changes.
Note:
period applies to both the default group settings and each group.
you want to configure a quota.
settings other than the default. The table listing displays the following
information for each individual group quota:
— Group associated with the quota
— Space consumed by the group
— Soft limit of the quota disk space that you can temporarily exceed before
cleaning up
— Hard limit of the quota disk space that cannot be surpassed by the user
— Grace period of the quota
— Email address of person to notify about exceeding space limitations
for the soft and hard limits.
Only one grace period can be set per file volume. Therefore, the same grace
Managing Your Storage
131