Craftsman 536.773600 Operating Instructions Manual page 9

OPERATION
HOW TO USE THE
TRIMMER HEAD DRIVE LEVER
1. To engagethe tdrnmerhead,holdthecon-
trol bail against the handle. Move the
trimmer head drive lever forwardto en-
gage the trimmerhead. Sea Figure5. The
fasterthe engineruns,the fasterthe tdm-
mer headwill rotate,
2. Once the tdmmerhead is rotating,push
the tdmmerforwardto tdm.
HOW TO USE THE
THROTTLE CONTROL
1. Duringnormal use, set the throttle con-
trol lever in the FAST positionto run the
engineat full speed.
2. Pullthethrottle control lever backto de-
crease engine speed. Push the throttle
control lever forwardto increaseengine
speed.
3. To stop the engine, pull the throttle con-
trol lever completely back to the STOP
position.
ThrottleControl
Lever
Figure6
HOW TO USE
THE PRIMER BUTTON
1. Push the primer button five times. See
Figure7 for location.Wait approximately
two secondsbetween eachpush.
NOTE: DO not use the primer button to re-
start a warm engine after a short shutdown.
F-OOO210M 9