Operation - Craftsman 536.773600 Operating Instructions Manual

OPERATION
KNOW YOUR TRIMMER
READ THE OWNER'S MANUAL AND ALL SAFETY RULES BEFORE YOU OPERATE the tdm-
mer. To famiUadze yourself with the location of the controls,compare the illustrations with your trim-
mer. Save this manual for future reference.
Control Bail
Tdmmer Head Ddve Lever
Upper Handle
Throltle Control Lever
Recoil StarterHandle Fuel Cap
Handle Adjustment Knob
Shield Edge Guard
Trimmer Head Drive Lever - Engages
the rotationof the tdmmerhead,
Control Bell - Release to stopthe rotation
of the trimmerhead.
Throttle Control Lever - Controls the
speed or stopsthe engine.
Figure4
Palmer Button - Injectsfueldirectlyintothe
carburetor manifold for faster starts. See
Figure7.
Recoil Starter Handle - The engine is
equippedwith an easy pullrecoilstarter.
Shield Edge Guard - Protectsthe shield
byautomatically cuttingthe line tothe correct
leng_.
EYE PROTECTION
WARNING: Debris thrown from
the trimmer can result In foreign
A objects being thrown Into the
eyes, which can cause severe
eye damage. Always wear safety
glasses or eye shields when op-
eretlng the trimmer.
Always wear safety glasses. If you wear eye
glasses, put a Wide Vision Safety Mask over
your eye glasses.
F-000210M
HOW TO STOP
THE TRIMMER HEAD
1. Release the control bail. It will return to its
open position and disengage the thmmer
head.
8
HOW TO STOP THE ENGINE
1. Move the throttle control lever com-
pletely back to the STOP position.