Craftsman 536.773600 Operating Instructions Manual page 16

SERVICE AND ADJUSTMENT
HOW TO ADJUST
THE HEIGHT OF THE HANDLE
Use the knobs, on each side of the handle, to
adjust the height of the handle.
1. Hold the handle with one hand and loosen
both knobs untilthe ratchet teeth are dis-
engaged. Do not remove the knobs. See
Figure 15.
2. Move the handle up or down to the de-
sired position, then align the ratchet
teeth. Makesure both sidesofthe handle
are level.
3. _ghtentheknobs.
HOW TO SET THE HEIGHT OF CUT
CAUTION: Before you sst the
height of cut: stop the engine.
Walt for all moving parts to stop.
Allow the engine to cool and dis-
connect the spark plug wire.
The height of cut can be set from 1-1/2 inches
to 3 inches. Recommended cutting height for
the average yard is 2".
1. Use the T--wrench, found in the parts hag,
to loosen the set screw shown in
Figure 16.
2. Set the trimmer heed at the desired
height.
3. _ghten the set screw.
Height Of
Trimmer
Set Screw Head
T-Wrench
Height Guide
Figure 16
F-0(X)210M 16